Mikuni float needles x 4

Part REF: J078


In Stock


Set of x4 Viton tipped float needles to fit Mikuni carburettors. These do not fit Keihin carburettors. If the carburettors are flooding, before changing the float needles, check that the two 'O' rings on the float holder (where it pushes into the main carburettor body) have not hardened with age. Triumph recommend that after fitting new float needles the float heights should be checked and set at 14.5 mm. With the carburettors inverted and the floats resting, measure from the float chamber joint face to the top of the float, this should be 14.5 mm.

We stock seal kits for Mikuni and Keihin carburettors.

1000/1200 Daytona, 1200 Trophy